Interview
TCS NQT November 2026: Registration Last Date, Exam Pattern & 3-Week Prep Plan
TCS NQT November 2026: registration reportedly closes 12 Nov, exam 24 Nov. Eligibility, exam pattern, a 3-week plan and original practice questions.

Practise the rounds for the TCS NQT
Short answer: The TCS NQT November cycle is reported to close registration on 12 November 2026, with the exam on 24 November 2026 and a following sitting on 25 December 2026. We could not confirm these dates on a TCS page. The official TCS iON page says only that tests run every 2 to 4 weeks and that applications close 10 to 15 days before the first exam date of a cycle, which is consistent with a 24 November exam and a mid-November deadline. Treat the dates as provisional and confirm them on the official TCS iON NQT page before you plan anything around them.
If you have three weeks, you have enough time to do well on the aptitude part and to get your coding fundamentals reliable. This guide gives you the dates we have, who can apply, the pattern as far as we can source it, a day-by-day plan, and original practice questions you can try right now.
TCS NQT November 2026: Key Dates (last checked 29 October 2026)
| Detail | What we found | Status |
|---|---|---|
| Registration last date | 12 November 2026 | Third-party listing; not shown on the official page. Confirm before relying on it |
| Exam date | 24 November 2026 | Not confirmed on an official TCS page. Consistent with the 10-15 day rule below |
| Next sitting | 25 December 2026 | Not confirmed. Check the official page |
| Test frequency | Every 2 to 4 weeks at TCS iON authorised centres | Confirmed on tcsion.com |
| Registration closes | 10 to 15 days before the first exam date of a cycle | Confirmed on tcsion.com (FAQ) |
| Hall ticket | Emailed 2 days before the exam | Confirmed on tcsion.com |
| Mode | In-centre only, English only, no negative marking | Confirmed on tcsion.com |
| Score validity | 2 years, no pass/fail cut-off, unlimited retakes, best score counts | Confirmed on tcsion.com |
Two things worth knowing. First, the official page leaves its "Test Date" and "Apply before" fields blank, so every specific date you see online, including ours, is second-hand. Second, there are several TCS hiring routes that use the NQT name: the paid TCS iON NQT you can take at a centre, and the separate all-India campus hiring drive run through TCS NextStep. The latter closed for its 2026 cycle according to one third-party guide we read, so check which route a given page is describing before you act on its deadline.
⚠️ Important: Search results for this exam disagree with each other. We saw an earlier October cycle (registration reported closing 7 October, exam 19 October) and several older cycles. Do not use a date from an article unless it names the cycle and the year.
Who Is Eligible for the TCS NQT?
The official TCS iON page lists:
- Pre-final or final year UG, PG or Diploma students
- Candidates with a degree and specialisation, passing out between 2022 and 2028
- Freshers with less than 2 years of experience (as worded in the FAQ; the main page says up to 2 years)
- Age between 17 and 30 (stated in the FAQ only)
Eligibility wording differs slightly between the main page and the FAQ, and the all-India hiring drive has its own year-of-passing rules that change by year. If you are on the border (for example a 2028 graduate), read the current rule on the page you register through.
The TCS NQT Exam Pattern
Here is where honesty matters. What the official page confirms is the structure by variant:
| Variant | What it tests (per tcsion.com) |
|---|---|
| Cognitive | Verbal ability (grammar, reading comprehension), reasoning ability (pattern, problem solving, visual-spatial), numerical ability (arithmetic, statistics, data interpretation) |
| IT | Cognitive skills plus advanced IT programming (advanced coding), basic and advanced aptitude, and a psychometric assessment |
| BFSI | Financial markets and services, basic aptitude, psychometric assessment |
| Non Tech | General quantitative, verbal and general mental ability |
For software roles you want the IT variant. The official page gives no question counts or section timings, so everything below comes from third-party prep sites, which conflict on details.
Foundation and Advanced (third-party description)
Prep sites commonly describe one integrated test of roughly 190 minutes in two parts:
- Foundation: numerical, verbal and reasoning ability. One guide gives 25 minutes per section, 75 minutes in total.
- Advanced: advanced aptitude plus coding. Guides say coding can be attempted in C, C++, Java, Python or Perl.
Question counts quoted range from about 82 to about 90, and one site lists a different Foundation length altogether. We cannot tell you which is right, and we are not going to pick one for you. Look at the instructions and the sample test on your hall ticket and the TCS iON site.
Ninja, Digital and Prime (third-party description)
The same sources say the NQT is not three separate exams. Your Foundation score is used for the Ninja track, and stronger Advanced performance, including solving coding problems, is used for the Digital and Prime tracks. Specific cut-offs quoted online (for example a Foundation score plus one fully solved coding problem for Digital) come from prep sites. One of the guides we read states that TCS does not publish its cut-offs. So plan to maximise both parts rather than optimising for a rumoured number.
💡 Pro Tip: The official page says there is no negative marking. That changes your strategy: never leave an aptitude question blank. Spend your last two minutes in a section guessing everything you skipped.
A 3-Week Plan for the 24 November Exam
Assume you start today, 29 October, and the exam is on 24 November. That is almost four weeks, but the first days go on registration and a baseline. If your date is later, stretch the middle week.
Before you start (29 to 31 October)
- Register or confirm your registration on the official page, and save the hall ticket date.
- Take a baseline: 20 aptitude questions and 1 coding problem, timed. Note what felt slow.
Week 1 (3 to 9 November): Numerical and verbal
- 45 minutes a day of numerical ability: percentages, ratio and proportion, time and work, speed and distance, averages, simple and compound interest, permutations, probability, basic data interpretation.
- 30 minutes a day of verbal: reading comprehension passages, error spotting, sentence completion. Read one editorial a day and summarise it in two lines.
- Two coding problems a day, easy level, in one language. Focus on reading input correctly.
- Milestone: 80 percent accuracy on timed 20-question numerical sets.
Week 2 (10 to 16 November): Reasoning and coding fundamentals
- Reasoning: series, coding-decoding, blood relations, seating arrangements, syllogisms, direction sense. Do one puzzle set a day.
- Coding: arrays, strings, hash maps, two pointers, sorting, simple recursion. Use the DSA Patterns Sheet in order. Write every solution from a blank file.
- Registration reportedly closes on 12 November. If you have not registered by 10 November, do it first.
- Milestone: solve a medium array or string problem in 25 minutes without looking anything up.
Week 3 (17 to 23 November): Simulate and tighten
- Two full timed mock tests this week, using the section timings you find on your hall ticket or the TCS sample test.
- After each, log every miss in one line: concept gap, careless error, or time pressure.
- Revisit the log daily. Do not start new topics in the last three days.
- Confirm your centre, ID proof and travel on 22 November.
- Milestone: two mocks where you finish every section and leave no question blank.
Exam day (24 November)
Arrive early with the hall ticket and the ID the instructions name. Read all coding problems first, solve the easier one fully, then attempt the second. A fully passing solution is worth more than two half-written ones.
Original Sample Questions
These are written by us for practice and are not from past papers.
Numerical
Q1. A shopkeeper marks a bag at 25 percent above cost, then gives a 12 percent discount. What is the profit percentage?
Approach: take cost as 100. Marked price 125. After 12 percent discount, selling price is 125 x 0.88 = 110. Profit is 10 percent.
Q2. Two pipes fill a tank in 12 hours and 15 hours. A drain empties it in 20 hours. With all three open, how long to fill the tank?
Approach: rates per hour are 1/12 + 1/15 - 1/20. The common denominator is 60: 5/60 + 4/60 - 3/60 = 6/60 = 1/10. So 10 hours.
Reasoning
Q3. Series: 3, 7, 15, 31, 63, ?
Approach: each term is double the previous plus 1. Next is 63 x 2 + 1 = 127.
Q4. In a code, SMART is written as TNBSU. How is CODE written?
Approach: every letter moves one place forward (S to T, M to N, A to B, R to S, T to U). So CODE becomes DPEF.
Coding problem 1: balanced pivot
Given an array of integers, find the leftmost index where the sum of the elements strictly to its left equals the sum of the elements strictly to its right. Return -1 if none exists.
Approach: compute the total sum once. Walk the array keeping a running left sum. At index i, the right sum is total - left - a[i]. If it equals left, return i. Update left += a[i]. This is O(n) time and O(1) space. Check the edge cases: a single element (pivot at index 0 with both sides empty, so 0 equals 0), negative numbers, and all zeros.
PYTHON
Coding problem 2: first unique word
Given a sentence of lowercase words separated by single spaces, print the first word that appears exactly once, or NONE if every word repeats.
Approach: split into words, count occurrences in a dictionary, then scan the words in original order and print the first with count 1. Two passes, O(n). The common mistake is iterating over the dictionary instead of the original list, which loses order in older Python versions and invites bugs in other languages.
PYTHON
Try both without looking at the code, then run them against edge cases: empty input, one word, all duplicates.
What to Practise on Your Own
| Skill | Where to practise |
|---|---|
| Aptitude speed | Timed 20-question sets, one section at a time |
| Coding fundamentals | DSA Patterns Sheet |
| Explaining your code aloud (for the interviews that follow) | An AI mock interview |
| Competitive-style coding | The TCS CodeVita guide and the MockVita guide |
| The interview after the test | TCS interview questions and process |
NQT and CodeVita are different things. NQT is a qualifying assessment you can retake; CodeVita is a ranked contest with its own registration and dates. If you are targeting both, the 3-week plan above still helps, because both reward fluency in one language and clean handling of input.
Common Mistakes
❌ Trusting an unverified date. Screenshot the official page on the day you register.
❌ Leaving questions blank. There is no negative marking per the official page.
❌ Practising only coding. The aptitude part is where candidates lose easy marks, and the Ninja route leans on it.
❌ Switching languages. Pick one and stay with it.
❌ Ignoring the psychometric part of the IT variant. It is on the official description. Answer honestly and consistently.
Frequently Asked Questions
What is the TCS NQT registration last date for November 2026?
A third-party listing puts it at 12 November 2026. The official TCS iON page leaves the field blank and says applications close 10 to 15 days before the first exam date of a cycle. Confirm on tcsion.com.
When is the TCS NQT exam in November 2026?
24 November 2026 is the date we have seen, with another sitting reported for 25 December. Neither is confirmed on an official page as of 29 October 2026.
What is the TCS NQT exam pattern?
The official page lists the sections by variant (verbal, reasoning and numerical for Cognitive; plus advanced coding and a psychometric assessment for IT). Third-party sites describe a roughly 190-minute test with Foundation and Advanced parts, but they disagree on question counts, so check your hall ticket.
Is there negative marking in the TCS NQT?
No, according to the official TCS iON page.
Can I retake the NQT?
Yes. The official page says retakes are unlimited and your highest score counts. Scores are valid for 2 years.
Which languages can I use for the coding questions?
Third-party guides list C, C++, Java, Python and Perl. Check the language list in the test interface.
Is TCS NQT the same as TCS Ninja, Digital and Prime?
No. Ninja, Digital and Prime are hiring tracks. Third-party sources say one NQT score is routed to them, and that cut-offs are not published by TCS.
How is NQT different from CodeVita?
NQT is a qualifying test with aptitude and coding. CodeVita is a ranked coding contest. See the CodeVita 2026 guide for its dates.
How do I prepare in three weeks?
Follow the plan above: aptitude first, coding fundamentals in week 2, timed mocks in week 3.
Final Thoughts
The dates are the shakiest part of this exam, and the preparation is the most solid. Whatever the exact deadline turns out to be, the work is the same: fast, accurate aptitude, one language you can code in without thinking, and two full mocks before the day.
Confirm the dates on the official page, register early, and start the baseline today.
Related reading: TCS CodeVita 2026 guide · TCS MockVita 2026 guide · TCS interview questions and process
Topics
Related on Thita
Your next step
Practise the rounds for the TCS NQT
Most selection rounds open with a timed coding test. Work through the DSA patterns they draw on, run your code in the browser, then rehearse the interview out loud with an AI interviewer.